MODEL 5500 MATERIAL HANDLING DOLLIES
MODEL 2127 MEDIUM DUTY DOLLY
MODEL 2127 ALUMINUM DOLLY
DOLLY CARRY CASE AND REPLACEMENT PARTS
MODEL 2076 HEAVY DUTY DOLLY
MODEL 3310 SUPER DUTY DOLLY
MODEL 5500
EXTREME WEIGHT DOLLY
Designed to move very heavy articles in places where traditional equipment is not feasible;
the EXTREME WEIGHT DOLLY is a solution!
Normally a crane will lift the article and place it on a set of dollies for transport. The casters were chosen for the durability of the caster during rocking motion and uneven loads. The large diameter of the wheels supports easy start to rolling and allows the dolly to move over rougher surfaces; however, it is always best to use caution when moving very heavy articles over uneven floors or crevices.
Options: This product can be produced in aluminum or stainless steel, with various finishes, with various wheel and caster combinations, different cup diameters and depths or channel material welded to the top plate versus a cup.
 |
Extreme Weight Dolly |
|
|
| FRONT VIEW |
TOP VIEW |
MODEL 5500 EXTREME WEIGHT DOLLY
CONSTRUCTION:
BODY: 3/8” Thick steel plate with 6” diameter straight sided well with a powder coat finish. Well clearance is 2” from the floor as our standard but can we change per your specifications.
CASTERS: Super duty kingpin-less casters are chosen for the durability of the kingpin-less design. The weakest link in a standard caster is kingpin failure causing the caster to break at the raceway; this is avoided in the kingpin-less caster design.
WHEELS: 6” diameter wheels made of durable 3/4” thick polyurethane thread with a heavy duty cast iron center and tapered roller bearings. The tread is 65 Shore D hardness polyurethane chemically bonded to the wheel center to assure durability in heavy duty service. The polyurethane is non-marking, non-staining and floor protective. It resists oil, grease, water and most solvents.
WEIGHT CAPACITY: 3500 lbs per dolly
TEMPERATURE RANGE: -45 o to 180 o F.
WEIGHT: 90 lbs. each
STANDARD VARIATIONS:
|
|
MODEL 5500-EZ |
MODEL 5500-DU |
Same base and caster as above with 6” diameter wheels made of quiet riding and durable polyurethane thread with a cast iron center and tapered bearings. The slightly crowned tread is 95 Shore A hardness polyurethane. The polyurethane is non-marking, non-staining and floor protective.
Feature: Excellent floor protection at a lower cost
Weight Capacity: 3500 lbs.
Weight each: 85 lbs. |
Same base and caster as above with 6” diameter wheels made of ductile iron with rugged tapered bearings. Ductile iron wheels are resistant to breakage, chipping and cracking, even under the most severe impact loading.
Feature: Most durable unit in rugged service
Weight Capacity: 3500 lbs.
Weight each: 105 lbs. |
Contact us with your needs:
Telephone: 800-233-2663 or email: sales@bondcaster.com
|
